Smarty Tuner Programmer SO-3 CaTCHER Dodge Cummins 1998.5-2002

(No reviews yet) Write a Review
This product is not legal for use in the State of California.
Calculated at Checkout
Smarty SO-3 CaTCHER Tuner Programmer 
Dodge Cummins 1998.5-2002 

NOTE: Questions, Call 715-254-2307

Smarty Programmer Tuner CaTCHER SO-3 for 1998.5-2002 Dodge Cummins

Smarty is the best, most popular tuner for Dodge Cummins! 

*Stackable - Each program also available without added timing for use with a different power adding device that also had its own added timing.   

*CaTCHER software - 10 performance levels -

HP increases range from +10 on Fuel Saver to a 90hp maximum on #8 and #9 and vary based on truck.  The overall horsepower on a bone stock truck will be about 60 or 65 horsepower for the higher power levels. There is a large emphasis on driveability, smooth power delivery, and clean efficient tuning. The more modifications the truck has, the more power that will be made.  The Smarty Programmer Tuner is a versatile programmer for advanced tuning and horsepower capability. The MADS Electronics Smarty Tuner is stackable. You can use it alone to tune your 1998.5-2002 Dodge Cummins 5.9L engine, or ramp it up as an add on stackable programmer.

The CaTCHER software is a unique animal. It improves throttle response of the engine, spools up the turbo sooner, on average 200 RPM sooner, deals with the injection timing, alters the torque management. And more... Customers report that the engine now 'hangs' on the throttle.

The Smarty needs to be plugged into the OBD port of your truck to program the ECM-takes about 2 minutes--unplug and Go! Smarty tuner does not mount in truck.


*Fastest download in the industry -takes about two minutes 
*ABS tire height updates in just seconds 
*Not traceable in the stock setting. Smarty leaves no footprint 
*Cold weather 3 Cylinder High Idle is enabled in all softwares 
*Reads Diagnostic Trouble Codes in plain text 
*No tools required, no fuses to pull 
*USB built in for simple updates 
*Reliable, it works off your OEM hardware 
Programmable Speed Limiter from 25 to 250 mph (in trucks of 2001 and 2002 the speed limiter is programmable in mph, older trucks have only a speed adjustment)

SW# 0 : Half power .
SW# 1 : Fuel Saver
SW# 2 : Fuel + Boost Fooling
SW# 3 : Fuel + Boost Fooling + Timing
SW# 4 : “Soft” CaTCHER no added Timing
SW# 5 : “Soft” CaTCHER + added Timing   *Highest level we recommend on a stock automatic.
SW# 6 : Mild CaTCHER no added timing
SW# 7 : Mild CaTCHER + added Timing   **Highest level we recommend on a stock clutch.
SW# 8 : CaTCHER no added timing
SW# 9 : CaTCHER + Timing

Software number Zero:
About half the power of a stock software. Use it whenever reduced power is desired or when you have to make sure NO SMOKE is produced.

Software number One:
The Fuel Saver software. Mpg gains vary, in most cases a + 2Mpg has been
Please notice that the timing in this software is rather aggressive.
HEAVY TOWING is NOT recommended with this software level.

Software number Two:
This software increases the fuel delivered by the ECM and does the boost fooling.

Software number Three:
Same as software # 2 but timing has been added.

Softwares from number Four to number Nine:
The even numbered softwares are identical to the odd numbered ones, except for the timing. The softwares without added timing are intended for use with timing adding boxes.


Use Settings with "No Added Timing" (EVEN Numbered Softwares 2-4-6-8) when stacking the Smarty with other after market power adding devices that also add their own timing.
Use Settings with "Added Timing" (ODD Numbered Softwares 1-3-5-7-9) when NO Additional Timing has been used! Severe engine damage will result!!!

The power gain at top Rpm with these softwares is almost identical. These softwares differ greatly in HOW they get there. The higher the software number then more aggressive the throttle response from idle speed up. Aggressive to the point that the softwares Eight and Nine can become difficult to handle on slippery roads. ***Please be very careful when you use these softwares for the first time! It takes some time to learn how to handle them.

*This product is not legal for use in the State of California.

THIS IS A HIGH PERFORMANCE PRODUCT USE AT YOUR OWN RISK This product is intended for OFF ROAD USE ONLY This product is not intended to be used to break the law Do not use this product until you have read the following agreement. This agreement sets forth the terms and conditions for the use of this product. The installation of this product indicates that the buyer has read and understands this agreement and accepts the terms and conditions. DISCLAIMER OF LIABILITY MADS Electronics, it’s distributors, jobbers and dealers (hereafter Seller) shall be in no way responsible for the product’s proper uses and service. THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS. The buyer acknowledges that he is not relying on the Sellers skill or judgement to select of furnish goods suitable for any particular purpose and that there are no liabilities which extend beyond the description on the face hereof, and the buyer hereby waivers all remedies or liabilities expressed or implied, arising by law or otherwise ( including without any obligation of the seller with respect fitness, merchantability and consequential damages ) whatever or not occasioned by thesellers negligence. The Seller disclaims any warranty and expressly disclaims any liability for personal injury and damages. The buyer acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the buyer agrees to indemnify the Seller and to hold the Seller harmless from any claim related to the item of the equipment purchased. Under no circumstances will the seller be liable for any damages or expenses by reason of use or sale of any such equipment. The Seller assumes no liability regarding the improper installation or misapplication of its products. It is the installers responsibility to check for proper installation and in doubt contact the manufacturer. The buyer is solely responsible for all warranty issues from the manufacturer. LIMITATION OF WARRANTY MADS Electronics (Hereafter Seller) gives Limited Warranty as to description, quality, merchantability, and fitness for any particular purpose, productiveness, or any other matter of the Seller’s product sold herewith. The Seller shall be in no way responsible for the products proper use and service and the buyer hereby waives all rights other than those expressly written herein. This warranty shall not be extended, altered or varied except to be a written instrument signed by Seller and Buyer. The warranty is limited to one ( 1 ) year from the date of sale and limited solely to the parts contained within the products kit. All products that are in question of warranty must be returned prepaid to the Seller and must be accompanied by a dated proof of purchase receipt. All Warranty claims are subject to approval by MADS Electronics. Under no circumstances will the Seller be liable for any labour charged or travel time incurred by in diagnosis for defects, removal, or reinstallation of this product or any other contingent expenses. Under no circumstances will the Seller be liable for any damage or expenses incurred by reason of the use or sale of any such equipment. In the event that the buyer does not agree with this agreement: THE BUYER MAY PROMPTLY RETURN THIS PRODUCT, IN A NEW AND UNUSED CONDITION, WITH A DATED PROOF OF PURCHASE TO THE PLACE OF PURCHASE WITHIN TEN (10) DAYS FROM THE DATE OF PURCHASE FOR A FULL REFUND. THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE BUYER HAS READ AND UNDERSTANDS THIS AGREEMENT AND ACCEPTS THE TERMS AND CONDITIONS.