null

Read Reviews

Let's Fix Your Diesel Today!

Call Now  715-254-2307

Owner, Gary Nilsen, will answer your diesel parts question when you call.

2000 Ford F250 7.3L Injectors

bbbenhanced-2-15-over-stock.jpg

 

bbbpowerstrokeudp-hi-output.jpg

 

bbbinjectorhydra-87340.1432244224.1280.1280.jpg

americanflag.jpg    800-872-1944images.png2000 7.3 Powerstroke Injectors

These  7.3 injectors are highly dependable.
All 2000 7.3 injectors are flow tested and spray patterns checked. This guarantees you will receive a matching performance set.
Your 2000 7.3 injectors are split shot and fit  all late model 7.3 s. 
2000 7.3 injectors are also offered in a single shot, AA pre  Hybrid format, with our Hydra chip, including 6 hybrid programs.
Our Hydra chip holds up to 15 programs with a USB connection so you can load your own programs. There are many excellent downloads available on the hydra flash site. We are also able to email programs directly to you and you will be able to install them your self, using the USB connection which is mounted directly on the chip. Programs can be tailored by gear head, through Unlimited Diesel for a seamless custom fit and emailed to you for download. There are 15 slots on your Hydra chip, for alternate programs. 
 
We have a limited life time warranty on all 2000 7.3 injectors, which means if your injectors have an unwarrantable issue and not a negligence issue such as severe contamination or something like gas in the fuel, we will repair and return at no charge as long as you own your truck. So fill out the warranty before you do anything else. you will be glad you did.
 
 When you receive your new 2000 7.3 injectors, there will be a slip of paper with a red stop sign and a web site address for you to warranty your injectors online by logging in your injector serial numbers. Keep in mind that there are shops that do not take responsibility and do not keep the the paperwork or complete your Warranty info. Get the serial numbers, your self, (take pictures) off your new injectors before they are installed. Core returns should be handled with care. The solenoids need the most protection as the are susceptible to fracture chipping and broken electrical connections. A lot of damage occurs during shipping, so we ask that you reuse the same shipping materials your new injectors came in. All damaged solenoids will be replaced with new at a cost of $50.00 each. There will be a call tag on the outside of the 2000 7.3 injectors shipping carton, in a plastic (packing slip type) pouch. Use this call tag to return your old cores. It doesn't get any easier. 
These are one of the best 2000 7.3 injector products available. Check out our reviews online. Our 2000 7.3 injectors hold a great reputation for Quality, Performance, and Great Service.
 
*Here are some tips on installing your 2000 7.3 injectors- Always check the bottom of you injector cups for cracks and to make sure the copper crush washer was not left behind. In either case you will not have a good seal, causing major issues. Also,seat your injectors properly by lightly tapping 
them in until you hear them seat. Do not depend on the hold down bolts to get the job done. Keep your new 99 7.3 injectors sealed in the packaging
untill it is time to drop them in the hole. By doing so, you avoid all the contamination and accidental damage to them possibly falling on the floor.
Also, try to install your injectors indoors. Believe it or not, the wind is not your injectors friend. A gust of dust is all it takes to give your new 2000 7.3 injectors trouble. 10 microns is all it takes to take down an injector, attacking primarily the plunger and barrel assembly. (Ben there done that) .
Get as much air out of your fuel system before you attempt to start your 7.3.
Reason being is that you want to avoid cavitation(Air Bubbles In the Nozzle) while the oil pressure is down. Cavitation in your new 2000 7.3 injectors  will erode the spray patterns under pressure, over time. Your high pressure oil pump has a maximum PSI of 3000. Cavitation @ 3000 PSI will compromise your spray patterns and that is why you should never rev your engine to get air out more quickly.
We recommend starting at idle for a minimum of 45 minuets.
When your engine has smoothed out, you should drive it for about 50 miles, in order to dissipate the last of the air. Listen to your motor for any hick ups. If all is well your are good to go, with a perfectly preserved set of 2000 7.3 Injectors. Remember to call us if you have a situation where you can use our help. We will do our best rectify any technical situation you may encounter. You will find a great bunch of guys to get you going with good solid advice regarding your 2000 7.3 injectors. I personally have sold 7.3 injectors since about 2000 and have not found a greater bunch of guys than we have right now.Our success depends on good working relationships and quality products. A good reputation doesn't hurt either.
Your 2000 73 Powerstroke has now become a legend world wide. A new truck simply is not that much better. Just a huge price tag for a stock vehicle.
In reality your Powerstroke will do the same job. A set of 2000 73 injectors is a great investment to keep you on the road. Investing in a truck that uses DEF,DPF filters and a choking EGR simply make it a poor investment with disappointing performance and a lot of extra expenses, you did not plan for.
Keeping your 7.3 running is a great commonsense way to go. They say, if the frame is not rusted out, your 7.3 is a keeper. Think of what kind of 7.3 you would have if you spent half the money as apposed to a new truck. A beautiful solid truck. Isn't that what we all want?