425 HP Dodge Clutch 425HP HD Series South Bend Clutch 13" Flywheel Getrag 88-93, NV4500 94-04, Non-HO 235HP NV5600 99-00.5

$824.50
(No reviews yet) Write a Review
SKU:
13125-OK-HD
UPC:
13125-OK-HD
Availability:
Single Disc Clutch Kits usually ship within one business day.
Shipping:
Free Shipping
425 HP Dodge Clutch 425HP HD Series South Bend Clutch 13" Flywheel Getrag 88-93, NV4500 94-04, Non-HO 235HP NV5600 99-00.5

NOTE: Questions, Call 715-254-2307

 South Bend Clutch HD Series 13125-OK-HD With Flywheel

13" Flywheel Conversion High Torque Clutch

425HP,  900 Torque

Dodge Clutch -fits Dodge 1988-2000.5 Getrag, 1994-2004 NV4500, and 1999-2000.5 NonHO NV5600 235hp engine

FREE SHIPPING in lower 48 only

This is our heavy duty design of our 13" clutch kit with a 3" wide premium Organic lining. Perfect for moderate tuning and heavy towing while maintaining smooth engagement.

The South Bend Clutch HD Series clutch disc features a 13" double wide, high torque clutch facings with heavy duty 6 spring dampening system.

This clutch is designed for the moderately increased horsepower trucks, 425hp 900 torque, offering a very smooth engagement with light pedal effort, this is the perfect towing clutch.

The pressure plate comes straight from our street series, dual disc clutch, with the extra wide casting and heavy duty design.

Complete Clutch Replacement Kit, comes with everything you need to do the job, including Throw Out Bearing, and Stock Needle Pilot Bearing, and alignment tool. *88-93 Getrag trans must re-use stock crank bolts*

This Dyna Max kit features a performance organic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disc failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH (Non-HO) 12 ¼” clutches. South Bend has taken the 13” ETH (HO) Clutch and modified it to accept the 1 ¼” input shaft. By doing this, it enabled them to offer a disc center that is 2-3 times larger and stronger then can be provided in the 12 ¼” clutch kits. This kit comes with a flywheel, re-drilled and refaced to accept the larger clutch and is rated to handle up to 425 horsepower & 900 ft. lbs. of torque. Years 1988-2005 5-Speed & 6-Speed non-ETH. 

NOTE: It's very important to Break-In your clutch with 500 miles of stop and go driving before you pull a load.
Your clutch will last longer if you avoid down-shifting whenever possible.  Down-shifting flexes the pressure plate, causing uneven wear.  Just remember, Use your breaks instead--they're are alot less expensive to replace! 

Application:

1988-1993 5 Speed Getrag
1994-2004 5 Speed NV4500
1999-2000.5 6 Speed NV5600 without High Output 235hp

Warranty: 1 year, 12,000 miles, whichever comes first, manufacturer defects only. Sale Price is set at lowest legal limit! Any Purchase of these clutches at a lower price (from anywhere) will void your South Bend warranty. 715-824-5051

 more-clutches-2.jpg

U.S. Ground Map Results

 

Business days in transit from: MISHAWAKA, IN 46545  Printer-friendly   

 

US Time in Transit Map

Service Map colors may vary due to differences in hardware and software. This map is a general representation of UPS Ground transit times. For service availability and to calculate the delivery time for a package shipped between a specific origin and destination worldwide, Calculate Time & Cost.
South Bend Clutch, Inc. warrants that our clutches are free from defects in workmanship and material under normal use and service. The obligation of South Bend Clutch, Inc,. under the warranty is limited to repair or replacement of the defective product, which fails within 12 months or 12,000 miles. We will not be liable for losses that might be claimed as a result of the failure of any part, nor shall we be liable for damages or injury to any persons or property resulting from the misuses or improper installation of any part subject to this warranty. South Bend Clutch, Inc. reserves the right to examine all parts returned for warranty claim to determine whether or not any such part has failed because of a defect in material or workmanship. Our obligation under this warranty shall be limited to repairing, replacing, or crediting, at our discretion, any part found to be defective. The Limited Warranty will not be valid under the following express conditions: • When not installed by a certified mechanic. • When flywheel was not replaced with new or resurfaced to specification. • Clutches which have been altered, improperly installed, or damaged by accident, negligence or misuse. • When transmission fails or has excessive wear. PRODUCTS USED FOR HIGH PERFORMANCE AND/OR RACING PURPOSES WHICH THEY WERE NOT ORIGINALLY ENGINEERED FOR, WILL NOT BE COVERED. Return Policy No returned product for warranty, repair, or replacement will be accepted without a return authorization number (RMA). Please call Black Cloud Diesel Performance at 715-824-5051 to discuss or begin any warranty process.

Videos Hide Videos Show Videos