null

S300/S400 TWIN TURBO PIPING KIT FOR DODGE CUMMINS 5.9L 2003-2007

$1,699.00
(No reviews yet) Write a Review
SKU:
DPS-S475-PIPEKIT
UPC:
DPS-S475-PIPEKIT
Shipping:
Calculated at Checkout
S300/S400 TWIN TURBO PIPING KIT FOR DODGE CUMMINS 5.9L 2003-2007

NOTE: Questions, Call 715-254-2307

S300/S400 TWIN TURBO PIPING KIT FOR DODGE CUMMINS 5.9L

S300/S400 COMPOUND TWIN TURBO PIPING KIT

FITS 2003-2007 CUMMINS 5.9L COMMON RAIL

*This is a piping kit only, it does not come with any turbos or manifold.  It requires a 3rd Gen style S300 platform turbo.  Can be used with turbos from DPS, Industrial Injection, High Tech, BD, ATS, or any S300 Based Turbo. *  

*Includes two separate oil drain lines.

*Only $250 to add a 3-Piece Exhaust Manifold to this kit.  This kit is specifically designed to be used with your stock turbo and an S400 turbocharger T-6 flange.*

Diesel Power Source, Twin/Compound Turbo Piping Kit fits like an OEM product. 

When used with the recommended turbos, airflow will increase significantly. EGT's are typically reduced by 250-450 degrees, over a single turbocharger. Again, your turbos will dictate the actual performance.  Feel free to see if your turbo combinations will work with this piping kit.

Specifically tuned for 300 to 600 horsepower applications. This kit is the most unique and innovative Twin Turbo Kit available today, with features like:

  • •Direct bolt-on application, no cutting or fabrication needed.
  • •Comes with dual oil drains.
  • •Bolts directly up to the stock exhaust.
  • •The absolute largest air filter on the market.
  • •Air tubing is Silicone with Kevlar embedded, you don't have to fight to the a steel air lines. Tubing is flexible, and tested to over 100 psi. Tubes are sticky so they don't blow off, under pressure, and come in a variety of colors.
  • •Steel braided oil feed lines.

Head studs are highly recommended for boost pressure over 50 psi, and fire rings recommended for boost pressure over 60 psi.

Kit includes: Air Intake Tubing, Air Filter, Cast Iron Hot Pipe (carries exhaust from primary to secondary turbo), 1 Silicone Charge Air Tube (low pressure), 1-Polished Aluminum Charge Pipe (high pressure), 2-Steel Braided High Temp Oil Supply Lines, Oil Drain Line, Turbo Gaskets, Oil Line Adapters, Mounting Bolts, Exhaust Adapter (from S475 to exhaust pipe), V-Band Clamps, High Torque T-Bolt Clamps, Low Torque Clamps, Support Bracket For Large Turbo, New Wastegate Actuator and Bracket, Exhaust Wrap, Installation Instructions.

Give us a call at 801-930-8404 with any questions.